Auxbeam 6 Gang Switch Panel BC60 Universal Circuit Control Relay System Automatic Dimmable LED Switch Pod Touch Control Panel Switch Relay Box for Car Truck Pickup Boat UTV SUV-Blue, 2 Year Warranty

Product Information

Universal 6 switch panel relay system. Power up to 6 lights or accessories from one convenient place. There are cases where a larger size might be an advantage and Auxbeam’s RA80 XL is the answer for those situations. Let’s say you’re installing your switch panel in an ATV/UTV that’s going to spend a lot of its time on rough, bouncy trails. Or perhaps a Jeep that’ll be doing the same types of terrain –the RA80 XL panel with its largerswitches could be easier to use when moving in rough environments. How do these devices need to be controlled?

Also, they’ve provided spare fuses and a fuse puller on the inside of the control box coverso if a fuse is bad, a light will indicate that and spare fuses and a puller are right there to fix the problem. Our boat switch panels are available in unloaded, unwired and fully wired and for a variety of number of switches. Other considerations are vertical or horizontal positioning. Many are available with circuit breakers. When you need solid advice, just ask our Customer Service Representatives. We’re boating enthusiasts like yourselves and will be glad to advise you so you can make an informed decision regarding an electrical component’s replacement or upgrade. Is it Time to Upgrade Your Boat’s Switch Panel? The AR800 can be controlled and configured from your smartphone through Bluetooth. Why would you want to control your devices from a smartphone when you’re sitting in the driver’s seat with the switch panel right in front of you? Isn’t that redundant? Not really –there are two ways you might use this capability:

Is it Time to Upgrade Your Boat’s Switch Panel?

All in one design for your ultimate convenience. This kit has everything you need for installation and use. No need to buy extra parts. Now that you know all about Auxbeam switch panel kits, which one is right for your application? This decision tree should help… Auxbeam offers switch panels to handle either 6 accessories or 8 accessories. Most people these days are choosing to go with one of the 8-gang panels but if you only need to control 6 devices or you have very limited space to mount a switch panel, the 6-gang panel might be for you. Most of the 8-gang units are only slightly larger than the 6-gang units though and the extra circuits will provide for future expansion. This photo shows the relative sizes of the 6-gang and 8-gang compact and XL switch panels.

Once the control unit is mounted, all you really need to do is run power cables from the control box to the battery, run a wire from the control box to a switched accessory circuit (to power up the box only when the ignition switch is in the “on” position), run the switch panel cable to the control box, and connect your accessories. All of this is clearly described in the included instructions.It’s a good idea to read the instructions through from beginningto end before starting your installation to familiarize yourselfwith the entire process. We’ll cover some of the decision points below. The only real requirement is that the switch panel cable can reach from wherever you mount the switch panel to wherever you mount the control box. Most Auxbeam switch panels come with a 9-foot cable (10-foot for the RA80 XL) so mounting the switch panel in a convenient place in the cab and mounting the control box in a convenient place in the engine compartment should be possible in almost any vehicle.